Here at TLCB we’ve taken a fairly backwards approach to employee payment. As in, no one gets paid anything. But why should we have all the fun when we could not pay you guys for doing work too! Cue Francesco Frangioja, who joins us here at TLCB to review one of Game of Bricks’ new lighting kits. For free. Because he’s great. Over to Francesco!

…

TLCB kindly offered me the chance to pick two Game of Bricks light kits for 2020 vehicle sets, and my first choice was the light kit for the LEGO Technic 42111 Dom’s Dodge Charger set. After a couple of weeks (due to the shipment), I finally had time to install the kit in the set for which it was intended.

The lighting kit comes in a cardboard box, black and premium quality, with only the logo of the manufacturer on it.

Inside the box I found: 

• Seven numbered plastic bags with tiny LEDs stripes and the thin, very thin cables
• Three un-numbered plastic bags with the battery box, some “junction” cable plus the control unit and the USB connector to connect the LEDs “circuit” to the battery box
• One booklet with the explanation of what each component is and its use/purpose
• A remote (because I got the remote/RC version of the kit)

The actual building instructions are found on the Game of Bricks’ website; a series of “photographic” steps that show where to place the individual “light points” and how to organize (where they have to pass) the various wiring. 

I’m already familiar with the installation of this kind of product (light kits from other manufacturers) and the instructions were very similar, so I was able to follow the steps for this set very easily. Installing all the front lights is pretty simple: you have to “squeeze” the various LED element between the respective/relative transparent piece and the underneath on which the transparent one is originally fixed.

After that, you have to place the “array stripes” in the position/as shown in the photo-instructions.

Because normally there is exactly zero space between a transparent piece and the stud below it, you need to push it in place carefully even with this super thin wire. In fact, compared to the kits of other manufacturers, the peculiarity of the kit from Game of Bricks is that only a few of the “light points” are glued into LEGO brick. In practice, only the bricks of set 42111 which have to be physically replaced with counterparts with the LED already wired and glued inside, have been inserted in the light kit. All other “light points” are realised by fixing the LED element between the transparent and to be illuminated LEGO element, and the stud of the underlying piece.

The rear section was just as easy to manage; once the wiring steps are completed, you need to attach the tiny connector to a “splitter piece”, also equipped with adhesive tape to fix it in the position indicated by the photographic instructions. The connectors are very thin, so the use of a modeling plier can make the job easier. The cables, although very thin, are very resistant to traction and torsion. You just have to pay attention to the “scissors effect”: if you “staple” them too hard between brick and stud, you risk that they get cut. Therefore, you must always pay a lot of attention and procedures gently and carefully. 

The battery box requires 3 AA-LR6 batteries and includes a female USB connector. It’s up to you to choice to fit it into the model (i.e. into the trunk) or to keep it outside the model. Just remember that you will need to be able to access the on/off button.

Once the installation is finished and all the LEDs are connected, the final result is really great. 

Keep in mind that the kit in my possession is the top version, the one with the highest number of lighting points and including remote control to manage the on/off of each group and some “lightshows”.

Unlike the light kits I have tried before previously, the solutions of modular wiring and the interlocking of the lighting elements between the transparent bricks and the stud below implemented by Game of Bricks are perhaps the two most significant plus: not having bricks with pre-glued LEDs inside, you do not have to do too many replacements of parts of the official set to be illuminated, as well as the modularity of the wiring, allow you to decide from time to time if and which lighting elements to insert and which not. 

You can find the Game of Bricks lighting kit for the 42111 Dom’s Dodge Charger set, alongside a wide range of other kits designed to fit official LEGO sets, by clicking here!