Tag Archives: Technic

Technic 42131 App-Controlled CAT D11 Bulldozer | Set Preview

2 Replies

Household pets and TLCB Elves don’t usually get on. From October 2021 however, we expect they might share a common nemesis; this is the brand new LEGO Technic 42131 App-Controlled CAT D11 Bulldozer. All 3,854 pieces of it.

Measuring 57cm in length and 37cm wide, 42131 brings the Caterpillar brand into LEGO’s burgeoning array of official partnerships – alongside equipment manufacturers such as Volvo, Claas, and Liebherr.

Four ‘Powered UP’ motors and a Control+ hub enable the set to be controlled via your mobile phone, with the huge yellow tracks, blade elevation and tilt, and ripper height all powered and remotely operable.

Those yellow tracks are new for 2021 too, making their debut on 42131, and featuring a tightening/loosening mechanism that we expect will make them highly sought after for builders’ own tracked creations.

A working piston engine complete with details such as brick built turbo-chargers, realistic (and – we must admit – rather excellent looking) decals, and a high level of visual exterior detailing including rails, ladders, exhausts, and lights, make for very impressive looking set, and one we expect will become mighty popular.

Aimed at ages 18+, the new LEGO Technic 42131 App-Controlled CAT D11 Bulldozer is expected to cost around £420, which – much to the relief of our Elves – is comfortably outside TLCB’s budget. If it’s within yours you can get your hands on all 3,854 pieces from October 2021, and your cat will never be able to relax again.

BriksMax Light Kit (42111 Dom’s Dodge Charger)

Leave a reply

The LEGO Technic 42111 Fast & Furious Dom’s Dodge Charger set received a rather good review here at TLCB when we got our hands on it. Certainly a better one than movies did. But, like those awful awful movies, could there be sequel; one that’s even faster and furiouser?

Well no, neither of those adjectives. But we do have a 42111 sequel that’s more sparkly.

That’s because we’ve outfitted our 42111 Dom’s Dodge Charger set with an array of LED lights courtesy of suppliers Lightailing, who have a huge range of LEGO compatible light kits available for sets including Creator, Modular Buildings, Star Wars, Harry Potter, City, and – as here – Technic.

Our 42111-compatible kit is produced by BriksMax, and it came in a neat box containing an instructions booklet, a 1 Year warranty card, a remote control, a battery box, and an alarming number of resealable bags.

Said bags were numbered and described, corresponding to the relevant point in the instructions denoting when to open each one. Inside each was a well-coiled set of wires, tiny circuit boards, sticky pads, or a combination of these.

So is adding the BriksMax light kit to your 42111 Dom’s Dodge Charger set fun? Absolutely not. Fiddly – yes. Fun – no.

Despite the instructions being reasonable, the installation process is effectively threading needle around two hundred times. It makes us wonder if these LED lighting kit companies could design a little attachment that clips into Technic holes and holds the wire, removing the need to endlessly thread LEDs through Technic beams and making the instructions simpler to boot (you can have that recommendation for free Lighting People!)

The process is made harder by the wires being black and in this case the model being black too, although the BriksMax kit does sometimes differentiate between wire types via coloured band, plus each LED has the bag no. printed on its reverse, which is a thoughtful touch.

Only a few parts of the set need to be disassembled to install the LEDs, and only two pieces are replaced (the front indicator bricks switching from tiles to studs to give more room for the LED inside).

Overall though, the installation process is not fun one bit. However, the end result is, well… fantastic. Continue reading →

Phlattening Phoenix

1 Reply

It was a peaceful morning here at TLCB Towers. Some Elves were quietly watching cartoons, some TLCB Writers were… er, quietly watching cartoons, and all was well with the world.

And then a BuWizz-powered truck ran a load of them over. Elves you understand, not Writers.

Built by Eurobricks’ blaz62, this monstrous Tatra Phoenix trial truck made easy work smushing our smelly little workers, thanks to twin motors, fully independent suspension, and six-wheel-drive.

The Elf at the controls was clearly enjoying itself, but fortunately we were on hand to promptly pick up the creation in question and end the violence, much to its annoyance.

A closer inspection of the model revealed modular construction, opening doors, and – for a Technic creation at least – a kinda detailed interior, but with a trial truck it’s really all about how the model drives.

Whilst we conduct some arduous ‘testing’ to determine this, you can see more of blaz62’s excellent all-wheel-drive Phoenix at the Eurobricks discussion via the link above, plus you can check out the creation in action via the video below.

YouTube

Blank Face

Leave a reply

Things with blank, expressionless faces are terrifying. How do you know what they’re thinking? That’s why car styling always sort of resembles a face, even if that face is an increasingly angry one these days.

Oshkosk didn’t get that memo though, and – in creating their HMETT 8×8 off-road truck – gave it a face of such horrifying blankness it could belong to a Cyberman.

Still, vacant serial-killer stare aside, the HMETT is a mega bit of kit, and so too is Thesuperkoala‘s Technic recreation, which includes eight-wheel-drive, four-wheel-steering, lockable differentials, a high/low gearbox, all-wheel springless suspension, a removable load bed, and BuWizz bluetooth remote control.

Which means it could drive around the house seemingly of its own free-will, which gives this writer shivers.

There’s more to see of Thesuperkoala’s excellent Technic Oshkosh HMETT 8×8 truck at both Flickr and via the video below; click the links to take a look, whilst this TLCB Writer draws smiley faces on anything vaguely resembling a head in TLCB office and tries to think happy thoughts…

YouTube Video

Devil Dog

Leave a reply

We love Technic Supercars here at TLCB. There’s no need for motors, and the car doesn’t have to actually be a ‘super car’, it just needs steering, suspension, a gearbox, and a piston engine. Perhaps it should be out next competition?

Anyway until then, here’s a Technic Supercar from one of the very best. Suggested by a reader, TLCB Master MOCer Crowkillers’ latest creation fits the Technic Supercar brief perfectly, with steering, all-wheel suspension, a 4+R gearbox (with a gear indicator on the dashboard too), and a V8 engine up front.

The doors, hood and trunk also open, and there’s more to see of Crowkillers’ ‘Cerberus’ Technic Supercar via Bricksafe, where two-dozen high quality images are available, and via the YouTube video below with a suitably devil dogish soundtrack.

YouTube Video

The Best LEGO Sets Reviewed by TLCB

2 Replies

The Lego Car Blog has many interesting pages away from the main page. Ok, that’s not true. The Lego Car Blog has some interesting pages away from the main page. One of them is the Review Library, which – according to the wizards over at Brick Insights – now contains 108 reviews. Some of which are even written by you guys.

Nearly three quarters of the reviews in the Review Library are scored (we probably forgot the rest), with the average score being 7.8/10, which probably makes sense as LEGO sets are usually rather good and we tend to review sets we like (although not always). Technic is the most popular theme, with sixty-six sets reviewed so far, and fifteen sets have received a score above 9/10 (or 5 stars) so far, versus sixteen sets with a score of below 6.

So, with over a hundred reviews now published, which LEGO sets have earned a much coveted perfect score here at The Lego Car Blog? Read on to find out! Continue reading →

Go-Kart Redux

1 Reply

Constructed for a Eurobricks contest, this is dazzz99‘s homage to the vintage 8842 Technic Go-Kart set, re-engineered using modern studless pieces, and with some rather lovely details too, including a radiator, oil filler cap, and air-filter attached to the working single-cylinder piston engine.

It’s an engine that’s far more appropriate than that found on original set too, which pre-dated LEGO’s purpose-built cylinder and piston parts and instead used an enormous brick-built mechanism that would’ve been larger than the driver. And probably killed them.

There’s more to see of dazzz’s lovely 8842 redux on Flickr via the link above, plus you can check out the contest in which it’s entered, the original 1980s Technic set that inspired it, and our review of a multitude of LEGO Technic Go-Kart sets via the respective links in the text.

B-Grade

Leave a reply

So often Technic’s B-Model, road graders like this Volvo G990 are the vehicles that give almost everything else we post a place to exist in the first place. So here to shine a light on their significance is Eric Trax, and this brilliant, er… 42114 B-Model…

OK, a B-Model this Volvo G990 may be, but it doesn’t feel compromised for it. Utilising around 90% of the parts from the 42114 6×6 Volvo Articulated Hauler set, Eric’s alternate redeploys the Control+ motors, control unit and app to give his grader remote control drive, steering, a three-speed automatic gearbox, and to power the main blade’s elevation.

The model features a few mechanical functions too, including a working piston engine, manually controlled ripper, and a seven-position blade angle. Best of all, Eric has released instructions for his road grader so you can build it for yourself if you own the 42114 set, and there’s more of Eric’s Volvo G990 B-Model to see on both Flickr and at the Eurobricks forum. Click the links above to earn yourself a B Grade.

YouTube Video

Build-a-Fiat

2 Replies

LEGO’s 10271 Creator Fiat 500 set is a fine addition to their officially licensed line up. Even if we don’t understand why it comes with an easel.

However being a Creator set, 10271 isn’t particularly technical. Cue TLCB Master MOCer Nico71, who has constructed a similarly-sized sixties Fiat 500 in Technic form with a whole heap more functionality. Although no easel.

Nico’s Fiat looks the part, with a combination of axles, lift arms and flex tubes recreating the 500’s famous shape, under which is a working rear-mounted two cylinder engine driven by the rear wheels, functioning steering, front and rear suspension, plus opening doors, front trunk and engine cover.

It’s a lovely build (that would make an excellent set too), and one that you can recreate for yourself at home as Nico has made building instructions available.

There’s more to see on Eurobricks, and at Nico’s excellent website, plus you can read his interview in the Master MOCers series here at The Lego Car Blog via the link in the next above.

YouTube Video

Smaller than Expected*

1 Reply

This may look like a normal cab-over light duty truck, but it is in fact a kei car, Japan’s microcar class in which vehicles can measure no longer than 3.4m, no wider than 1.48m, and have an engine size no greater than 660cc.

It is, therefore, absolutely tiny. Plus, obviously, it’s a Lego model, so it’s even smaller than that…

This superb Technic kei-class truck is a Daihatsu Hijet S110P, and it comes from syclone of Eurobricks who has packed it with an unfathomably large amount of features.

Under the really rather good exterior is a full remote control drivetrain, complete with all-wheel-suspension, all-wheel-drive, servo steering (linked to the steering wheel too), opening and locking doors, dropping bed side walls, and even working headlights.

There’s loads more of syclone’s Daihatsu Hijet to see at the Eurobricks forum, including a video of the kei truck in action. Take a look via the link above!

*That’s what she said.

Printed Discs

1 Reply

3D printing has changed the way things are made forever. Prototypes, one-offs, and recreations of long-lost parts can now be produced at a fraction of their previous cost thanks to computer-aided-design and little plastic granules.

Inevitably we’re now seeing 3D printed pieces appear in Lego creations too, including this one by regular bloggee Horcik Designs. Horcik’s cafe racer motorcycle uses a (very cool looking ) 3D printed front brake disc, which fits perfectly to the front wheel.

Steering, suspension, a piston engine, and a foot-peg operated two-speed transmission also feature, with these all built from standard LEGO pieces.

With LEGO themselves regularly creating new and bespoke pieces for official sets, we’re taking the stance that a model using a custom part doesn’t preclude it from appearing here.

You can see more of Horcik’s cafe racer at both Bricksafe and Eurobricks, the latter of which shows another of his creations that’s has gone (quite a long way) further down the 3D printing route…

8 Out of 10 Nazis…

2 Replies

It might sound like European cat food, but the Kettenkrad was altogether weirder than that. Half motorcycle, half tank, the Sd.Kfz 2 Kettenkrad was designed by NSU, powered by Opel, weighed 1.5 tons, and could climb slopes of over 24°, even in sand.

A unique drive system delivered power to both tracks simultaneously on hard ground, or – when the driver selected – operated via a subtractor to skid-steer on soft ground, and it was used throughout the Second World War to lay cables, transport troops, tow aircraft, oh – and to invade Russia.

This amazing motorised Model Team recreation of the Sd.Kfz 2 Kettenkrad comes from previous bloggee Samolot, and not only does it feature the most terrifying LEGO figure we’ve ever seen, it also includes a fully working remote controlled version of the real bike/tank’s ingenious steering system.

Exactly how it works is beyond the collective minds housed here at TLCB Towers, so the best way to see if you can figure it out is via the video below. There are also more images of both Samolot’s model and the real 1940s contraption at Bricksafe, and you can read the full build description and join the discussion via the Eurobricks forum here.

YouTube Video

James Young

1 Reply

Who? Well back in the ’60s (and a lot more before then), you could buy a car without a body. Usually a really posh one.

The point was a coach builder could create something more bespoke, and they were used frequently by the top luxury automotive brands of the time including Bentley, Aston Martin, Ferrari, Alfa Romeo and – of course – Rolls Royce.

This particular coach-built Rolls Royce is a 1960s Phantom V Limousine by James Young, and it has been recreated rather beautifully in Technic form by Agent 00381 of Eurobricks.

A full ‘Technic Supercar’ chassis sits underneath the elegant bodywork, with all-wheel suspension, working steering, an ‘auto’ gearbox, and a V8 engine.

Opening doors, hood, trunk, and glovebox are included, and there’ s even a rising partition to separate the peasant driving up front from the elite classes riding in the back.

There’s more of Agent’s Rolls Royce Limousine to see – including a link to building instructions and a video of the model’s features – at the Eurobricks forum. Click the link above to enter the rear of James Young.

Just Add String

2 Replies

The LEGO Technic 42098 Car Transporter is a fine set, and it’s also spawned a variety of alternative builds that have appeared here at TLCB, including hook-lift container trucks, buses, and… er, other car transporters, and this might be our favourite yet.

With ‘HOG’ steering, a 6-cylinder engine, opening doors and hood, rear lift, boom extension, elevation and rotation, working out-riggers, and a lockable winch, Dyen’s rotator tow truck would make an excellent set in its own right, and yet it’s constructed entirely from the parts found within the 42098 set.

Well, apart from some string for the winch, but everyone has string at home so that’s alright.

There’s more to see of Dyen’s superb 42098 B-Model at both Flickr and the Eurobricks discussion forum, where a link to building instructions can also be found.

Click the links to take a look, and maybe convert the pieces from your own 42098 set into this rotator tow truck too. Just add string.

Game of Bricks – Light Kit (42114 6×6 Volvo Articulated Hauler) | Review

Leave a reply

It’s review time here at TLCB! The guys over at Game of Bricks, makers of bespoke LED lighting kits for LEGO sets, offered us a few of their products for review, and because either a) we’re awesome, or b) this site is too incompetent to be sent sets from LEGO, this time we’re handing over to our readers!

Wojtek Hildebrandt was one of the readers to respond to the offer of a free lighting kit (via our Facebook page) the fastest, and fortunately for us he’s a throughly good reviewer too. Check out his thoughts on Game of Bricks’ lighting kit for his recently reviewed Technic 42114 6×6 Volvo Articulated Hauler set below! The answer was (b) by the way…

…

They see me hauling, they lighting.

The LEGO Technic set 42114 6×6 Volvo Articulated Hauler is a big and very yellow piece of equipment that I really like and that’s hard not to notice. That is of course if there’s light outside. But what if you need to haul whatever it is you are hauling around when it’s dark? The Game Of Bricks lighting kit comes to the rescue and frees you from filling in endless Health and Safety forms so I’m glad that TLCB together with GoB came up with this review idea. The kit I got is the full version – lights and sound with remote control. How does it look? How does it sound? What about installation and control? First things first.

The package comes in a nice black box with components divided into steps and packed in separate string bags containing required wiring, boards, and LEDs as well as any additional LEGO pieces needed to install it. Depending on the version of the kit – standard, remote, or remote + sound – there are different motherboards and additional equipment like remote or speaker. There is also a user manual, but it’s not the one that gets the user through the installation. It’s rather a general description of components and how to handle them. An actual step-by-step instruction is available on the Game of Bricks website, which is mentioned both in the user manual and in the order confirmation email from GoB. For the 42114 lighting kit, it is a series of pictures showing where to put which components, how to route the wiring, and sometimes what to remove from the set and when to put it back. Some other sets get video instruction – perhaps this one will get it too at some point.

Read twice, place once.

Before you start your installation or even before you open the bags, have a good look over the entire web instructions. Twice. Game of Bricks’ pictures are usually rather clear but not as much as LEGO’s own instructions. Black wires can sometimes hide in the shadows, other times some important details can get unnoticed as there is no description to point it out – this is, in particular, the case for rear lights that have two different LED colours. Still, I was able to follow the instructions with only a minor slip so I guess everybody should be fine. But knowing what to do is one thing and knowing how to do it is another thing entirely.

Do you fancy some knitting after a day of hauling? Have I got news for you!

Installing the lighting kit is a totally different experience to building the LEGO set itself. It feels more like knitting or sewing – at least I guess so. LEDs and wires seem fragile (even if they aren’t, excuse me for not running the stress test) so be gentle and patient. Get a pair of trusty tweezers, maybe even a magnifying glass, and make sure you have a good strong light on your workplace. You’re thinking of a headlamp? Why not. It takes light to install the lights, let’s call it a “circle of light”.

As for the LEGO set, you will need to remove or collapse the side mirrors to be able to lay the hauler on the side, and some wheels will need to be temporarily removed too. The beacon can be a problem when the hauler needs to be put upside down, so prepare for that as well. I need to say it quickly became tricky to handle this heavy set with an increasing number of wires leaving less and less space to firmly grasp the vehicle without worrying. The wires are a bit springy which is both a blessing and a curse. You will need to force them to your will, but eventually, they will obey. Connectors are tiny, they need to be put into ports precisely and with a click. Motherboard, extension boards, and optional speaker are attached to the set with double-sided adhesive tape. It seems to keep things together well, even the big speaker sits firmly in place. My only fear for the future is how to uninstall the lighting kit when I’d like to disassemble the set – will I be able to put it all back together?

Anyway, slowly but surely – like the hauler stuck on the first gear – you will get to the final step of the instructions; plugging in the power source. You can choose either the battery box that’s included in the lighting kit or any power bank – power goes through a USB connector so there are plenty of possibilities. Where to store it? If only there’d be a vast free space on the rear part of the hauler… Finally, the set should be ready to shine… Continue reading →