The Cat’s Out of the Bag

Leave a reply

‘Oh cra…’ thought this TLCB Writer upon entering TLCB Towers this morning. Locked during Sunday, with the Elves left to their own devices, Monday is always a riskier day to come in to the office.

And so it proved, as one of their number grinned at him from eye level, sat as it was atop a bookshelf, thumbing through a classic car magazine.

A brisk jog through the office revealed other elevated Elves, although fortunately none in off-limits areas following to our revised key-storage-policy, but all either curiously exploring things, or – less harmlessly – eating them.

The cause of the chaos then came trundling down the corridor, a rather brilliant fully remote controlled Caterpillar telehandler, commanded by an Elf sat atop the forks wearing a paper crown on its head.

With the King for a Day removed and order restored, we can take a look at the vehicle the Elves had used to access various previously inedible objects, including a book, a photo, a wooden ornament, and – perhaps most surprisingly – a potted cactus.

Built by previous bloggee LegoMarat, this superb Caterpillar TL642 telehandler is powered by no fewer than four motors, driving the wheels and steering, the boom elevation, and the fork tilt, all of which can be controlled via bluetooth thanks to a third-party BuWizz battery.

A life-like body is constructed from system pieces, enhanced by some excellent decals, and there’s more of Marat’s exceptional remote controlled Caterpillar to see at his photostream. Click the link above to take a look, whist we set about returning an undetermined number of Elves to ground level…

Wiiilsoon!

Leave a reply

This spectacular creation is a Scania R143 heavy haulage truck, as operated by H.C. Wilson of Elmswell in the UK, and created by truck-building legend Dennis Bosman (with the phenomenal decal work of fellow previous bloggee JaapTechnic).

Dennis’ model is a near perfect replica of H.C. Wilson’s restored classic Scania, complete with a ballast box for traction, behind which would be an enormous trailer when the truck was in use.

Dennis’ incredible Model Team replica also includes a suite of motors hidden within, powering two drive and two steered axles.

It’s an astonishing build that is absolutely worth a closer look, and you can find all of the beautiful imagery and further details at Dennis’ ‘Scania R143 H.C. Wilson’ album on Flickr, plus you can find out how he makes amazing creations just like this one via his Master MOCers interview here at TLCB.

Lest We Forget

Leave a reply

Lego Red Flower

This Armistice Day, we will remember them.

And Yemen. And Ukraine. And Gaza.

War Child. Red Cross. British Legion.

Sand Green

Leave a reply

Winter is coming here in TLCB’s home nation. The trees are red and yellow, the ground is thick with the shells of various nuts, and a good proportion of the country is under water.

So to cheer us up for the coming weeks when it’ll be dark at 4pm and we’ll be permanently cold, here’s a beach buggy for sunnier climes. Built by Eurobricks’ Jurss it features all-wheel-suspension, working steering, a rear-mounted flat-4 piston engine, plus a removable (and very green) body.

There’s more to see at the Eurobricks forum, and you can pretend you’re somewhere warm and sandy via the link in the text above. Unless you are actually somewhere warm and sandy, in which case can you invite us over?

Space Race

Leave a reply

This natty racing spaceship is one of the many creations now available to buy at this year’s awesome Creations for Charity store, where all the proceeds are used to buy LEGO sets for disadvantaged children this Christmas. Builder Cole Blaq has donated this creation and you can find it, and a whole lot more besides, at the Creations for Charity 2023 shop via the link above. Take home an amazing one-off creation and you’ll be doing something amazing for underprivileged children too. It doesn’t get any better than that.

Multiple Aliases

Leave a reply

This is one of those cars that is probably familiar to all of us, and yet may also not be at all. This is a Geo Tracker, built by 2GodBDGlory, and in fact it’s his Geo Tracker, being a Technic recreation of his real-world vehicle.

But it’s also a Suzuki Vitara (the name we know it as here in TLCB’s home nation), a Suzuki Sidekick, a Chevrolet Tracker, a GMC Tracker, an Asuna Sunrunner (what?!), and a Pontiac Sunrunner.

Which is confusing. Thus, because the Tracker/Vitara/Sunrunner is a Suzuki designed, engineered and produced product, with General Motors simply rebadging it and pretending it was theirs, we’re going to call it a Vitara from here on, and 2GodBDGlory’s is excellent.

Powered by two L Motors with Servo steering, and featuring all-wheel-drive, a remotely-operated high/low range gearbox, working suspension, LED head and tail lights, and a removable roof, 2GodBDGlory’s Technic Vitara is as capable off-road as his real one, and there’s much more of the model to see of both at Eurobricks and Bricksafe.

Whatever you know the Suzuki Vitara as where you’re from, click the links above to be impressed.

My Other Car is also an Off-Road Buggy

Leave a reply

LEGO’s Technic 42160 Audi RS Q e-Tron revealed here earlier in the year has brought a rather intriguing – if ultimately unsuccessful – prototype racing buggy to bedroom floors in brick form.

Powered by a 2.0 turbo-charged petrol engine, but driven by four electric motors, the real RS Q e-Tron is a hybrid of sorts, using the aforementioned internal combustion engine to generate electricity for those motors. It all sounds very clever, which it is, however Toyota’s traditional twin-turbo V6 petrol-powered Hilux T1s thumped it in the 2023 Dakar Rally.

Still, we like unusual vehicles here at TLCB, and thus we like the 42160 Audi RS Q e-Tron. But we like this even more.

Built only from the parts from the 42160 set, this superb Polaris RZR B-Model is the work of gyenesvi, and it captures the all-terrain side-by-side buggy beautifully in Technic form.

It also redeploys the LEGO Control+ remote control system from the 42160 set, with all-wheel-drive, all-wheel-suspension, and servo steering, which we’ve absolutely made the most of terrorising the Elves here at TLCB Towers.

Building instructions are available if you fancy turning your own e-Tron into a RZR, and you can find out more about the build at both Eurobricks and gyenesvi’s Bricksafe album. Click the links to make the jump, probably over a giant sand dune.

Cubo Italiano

Leave a reply

Once known for their beauty, a bleak and resolutely right-angled 1980s meant that Alfa Romeo’s designs were looking rather un-Alfa-esque by the mid-’90s. The brand badly needed a more modern look, and more modern cars too.

Aiming to rectify this, Alfa began working a pair of new small cars in the early ’90s, hiring Chris Bangle (of later and rather more controversial BMW fame) as lead designer.

The resultant Alfa Romeo 145 and 146 were revealed in the mid-’90s, and began the brand’s return to the European automotive mainstream. Of course being Fiat-derived Alfas they weren’t exactly cutting edge, carrying over the interesting-but-ancient flat-4 engines used since the ’70s, and still wearing an element of cubism that was necessitated by the 1980s platform underneath.

Still, around half-a-million 145 and 146s were sold before being replaced by the far more successful (and much prettier) Alfa Romeo 147, and previous bloggee Fuku Saku is one of the few that remember the slightly odd mid-’90s hatchback, paying homage via this rather good Lego recreation.

The hatchback and doors open, whilst some neat techniques cleverly capture the Bangle design, and there’s more of the model to see at Fuku’s ‘Alfa Romeo 145’ album on Flickr. Click the link above to make the jump and see mid-’90s Alfa at its most mid-’90s-ish.

IDisplayIt LEGO Display Case | Review

1 Reply

Here at The Lego Car Blog, we – somewhat unsurprisingly – love LEGO cars. And trucks. And motorbikes. Which means we own rather a lot of them.

It also means that the LEGO fans foe – dust – plagues TLCB Team, with our sets and creations all gradually turning grey unless we get a paintbrush out or the bristly attachment thingy on the vacuum-cleaner.

However even then our LEGO models still face a grave peril, what with there apparently being “a ridiculous number” of them, and further partner complaints such as “Our living room is not looking like a toy shop”. But that’s not our fault. LEGO models take up loads of space. Or do they?…

Cue Official LEGO Affiliate IDisplayIt, and their huge range of LEGO display cases. Constructed from 3mm clear acrylic, IDisplayIt’s cases are strong, beautifully machined, and – best of all – stackable, allowing models can be placed on top of one another so that you have space for even more! er, we mean they’re less likely to annoy long-suffering partners.

IDisplayIt sent us two of their cases to review, the Display Case for the LEGO 10295 Porsche 911 (which is also the perfect size for several other sets), and a copy of their Display Case for the LEGO 10321 Corvette, complete with a period-appropriate pre-applied vinyl background.

Each case arrived flat-packed in a well-protected envelope, and – as per rivals BOXXCO – with all six sides covered in a protective film which is immensely satisfying to peel off. Unlike the previously reviewed BOXXCO offering though, iDisplayIt’s design uses twistable plastic connectors to join the sides together, instead of machined aluminium blocks.

Whilst we appreciated the engineering of those metal cubes, iDisplayIt’s method offers a number of advantages, with the connectors being less visible (matching the transparency of the case panels), requiring no tools (an allen key is provided), and taking mere minutes to construct with half the number of screws. Seriously, we spent longer removing the protective film. Although we did really enjoy that.

IDisplayIt’s cases are also beautifully engineered, with a superbly printed background in the case of the Corvette, and with tolerances that LEGO themselves would be proud of. The result is that IDisplayIt’s cases make the LEGO models within them look absolutely fantastic, so much so – and we don’t give such scores away lightly – that they earn the maximum TLCB rating. Yes, they really are that good.

Order in the next few days (if you’re reading this at the time of publication) and IDisplayIt will guarantee Christmas delivery, or if you’re reading this a little later they’ll do their best (just let them know).

You can check out the full range of IDisplayIt’s LEGO Display Cases via the region-specific links below. We recommend you do.

IDisplayIt Stores;

United Kingdom | Europe | United States / Rest of World

★★★★★

Nosing Ahead

Leave a reply

The new BMW M4, as with many of the brand’s latest offerings, is rather… er, nostrilly. Still, in racing form that humungous beak must help with cooling, and the M4 is indeed available to buy as a factory racing car in GT3 specification.

Cue this phenomenal Technic replica of the M4 GT3 by previous bloggee and TLCB Master MOCer Lachlan Cameron (aka Lox Lego).

Deploying not just his own talents, but also the best of third-party LEGO compatible creators including BuWizz (bluetooth battery), System of a Brick (custom rims), snakeeyes (racing livery design), and Brick Visions (interior stickers), Lachlan demonstrates that Lego building can be taken far beyond the basic bricks.

Underneath that superbly-liveried exterior is a full remote control drivetrain consisting of a BuWizz brick and dual Buggy Motors, working steering, adjustable suspension with five ride heights, a straight-6 engine, opening and locking doors, hood and trunk, and LED head and tail lights.

A road car variant is available too, and there’s lots more of both versions to see at Lachlan’s ‘BMW M4 GT3’ Flickr album, at the Eurobricks forum, and via a YouTube video available here. Click the links above to nose your way there.

Only By the Night*

Leave a reply

From a tiny and beautifully packaged vehicle to… er, not that. The Ram 1500 is a ‘full-size’ (read ‘bloody massive’ for non-Americans) pick-up truck, marketed first as a Dodge, and today spun-off as an independent brand.

Now in its fifth generation, the 1500 is available with an array of enormous engines and – as pictured here – also as a ‘Night Edition’, which according to Ram’s own website means “Boasting a menacing monotone exterior and backed by equally intimidating capability”.

The words ‘menacing’ and ‘intimidating’ appear a few times on the first page in fact, which suggests both that Ram really need a thesaurus, and also that the 1500 ‘Night Edition’ is very much not our kind of vehicle.

Despite the real truck’s pointless dick-waving, this Model Team recreation of the Ram 1500 ‘Night Edition’ is rather excellent however, and comes from previous bloggee 3D supercarBricks.

Featuring working steering and suspension, plus opening doors, hood, load cover and tailgate, 3D’s creation also includes a few 3D-printed pieces and custom wheels. Presumably to enhance the truck’s menacing monotone exterior and intimidating capability.

There’s much more to see at 3D’s photostream, and you can click the link above to check out all of the superb imagery.

*The first track from today’s title album. It’s a good one.

Micro Machine

1 Reply

Unlike your Mom, Kei-class microbuses are really very small indeed. However they manage to pack a whole lot into their tiny footprint, with room for four adults plus luggage, some feature all-wheel-drive, and a few are even fully-fitted campers.

Cue apachaihapachai‘s terrific Technic microbus which, despite measuring just nine studs by twenty-four, features a complete remote control drivetrain courtesy of an L Motor, a Servo, and a BuWizz bluetooth battery, all completely hidden inside a neat 1990s kei-bus body. There’s even an interior. Kinda.

It’s a miracle of ingenious packaging and you can find out how apachai has done it at the Eurobricks forum. Click the link above to squeeze inside.

Challenge This

Leave a reply

Chrysler, beaten to the ‘pony car’ market by the Ford Mustang, decided that if was going to be late, strength in numbers would win the day. As such the corporation launched about a dozen pony/muscle cars, all of which seemed to do more-or-less the same job, and each being available with a bewildering array of engines.

This is one of Dodge’s offerings from the time, the Challenger. Like its Charger brethren that appeared here last month, this stunning replica of the ’70s pony car comes from Szunyogh Balázs (aka gnat.bricks), who has recreated the Challenger magnificently in Model Team form.

A detailed engine resides under an opening hood, the doors open to reveal a life-like interior, and even the Challenger’s chassis and drivetrain have been accurately replicated.

Excellent presentation caps a really impressive build, and there’s much more of the model to see at both Szunyogh’s ’12 Studs Challenger’ album on Flickr or via the Eurobricks discussion forum by clicking these words.

Crack Commando Corvette

Leave a reply

In 1972, a crack commando unit was sent to prison by a military court for a crime they didn’t commit. These men promptly escaped from a maximum security stockade to the Los Angeles underground, whereupon they bought a GMC van and a C4 Corvette, painted a giant red stripe down the side of each, and were somehow completely untraceable to the government.

No, we don’t understand how that works either, but no matter, because it allows us to publish this brilliant brick-built Chevrolet Corvette C4 (complete with a giant red stripe), as driven by the ‘A-Team’s Arthur Templeton “Faceman” Peck. Or someone rather more visually appealing.

Flickr’s László Torma is the builder behind it, instructions are available, and you can head to the Los Angeles underground via the link in the text above.

Hell Hath No Fury

1 Reply

‘Tis this season of scaring small children, taking candy from strangers, and dressing in little-to-nothing. But enough about this TLCB Writer’s plans for tonight, we’ve time for one final post before the Halloween spookiness begins. Cue Stephen King’s ‘Christine‘, a haunted ’58 Plymouth Fury containing the vengeful spirit of a past owner, and a taste for blood. Regular bloggee Jonathan Elliott has brought Christine back in brick form, and you can take a closer look on Flickr via the link. Just make sure you take good care of her…